Programmable Turnout Consoles and Control Equipment

Need to remotely control some doors, lights, siren etc?

The TOCP range will provide full programmable control from a single or multiple input via two way radio or decoder

 

The TOCP is the New Zealand Fire Service standard turnout console for North Island stations

Installation anywhere in NZ by authorized technicians upon request

Custom one off design & build is also available as used by Auckland International Airport Limited Crash Fire

Designed & manufactured in NZ by Lockyer Electronics Ltd

TOCP-LF Shown with Tait T2020

Limited  - TOCP-LF

The TOCP-LF is a microprocessor controlled device designed for minimal connectivity on rural fire, ambulance or small unmanned small fire stations.

Two independent siren cycles using the same siren output and manual siren override. Clock controlled siren feature for night shut off.

Doors, exhaust fan, stove & light outputs.

Pager terminal, call point, security inputs

Optional key cabinet control (TOCP-LF-K version)

12VDC operation

Programmable via a Terminal program.

Designed to fit Tait T2020, TM8250, Motorola GM3000 series radios.

Desktop or 19"rack mountable with optional mounts.


Inputs - 6
Outputs - 8

brochure

from NZD$2900 + GST

 

TOCP-NA Shown with Tait T8250

Standard - TOCP-NA

The TOCP-NA is a microprocessor controlled device designed for full control of unmanned stations requiring multiple circuits.

Two independent siren cycles using the same siren output and manual siren override. Clock controlled siren feature for night shut off

Multiple doors, exhaust fan, light , alarm, traffic lights, stove, key cabinet output controls

Inputs include door bell, security, remote control, traffic lights and pager terminal

12VDC operation

Programmable via a Terminal program or Windows based software

Designed to fit Tait T2020, TM8250, Motorola GM3000 series radios

Desktop or 19"rack mountable with optional mounts

Inputs - 13
Outputs - 16

brochure

from NZD$5250 + GST

TOCP Shown with Motorola GM3688

Standard with built in 100V PA - TOCP

The TOCP is a microprocessor controlled device designed for full control of unmanned stations requiring multiple circuits.

Two independent siren cycles using the same siren output and manual siren override. Clock controlled siren feature for night shut off.

Multiple doors, exhaust fan, light , alarm,  traffic lights, stove, key cabinet output  controls.

Inputs include door bell, security, remote control, traffic lights and pager terminal.

Microprocessor controlled 30W 100v internal PA capable of call announcement, wakeup alarm, door bell, PABX or optional MP3 voice  input

12VDC operation

Programmable via a Terminal program or Windows based software.

Designed to fit Tait T2020, TM8250, Motorola GM3000 series radios.

Desktop or 19"rack mountable with optional mounts.

Inputs - 13
Outputs - 16

brochure

from NZD$5775 + GST
 

Siren Override Controller

A stand alone unit designed to control operation of siren if night switching is required and paging terminal is present.


brochure

NZD$495 + GST
 

Rack mounted 30W 100V amplifier

The amplifier is housed in a two unit high rack mounting chassis. The unit includes a 30 watt power amplifier and preamp / control board providing the switching and tone generator functions.

PABX paging input and rising bells timer and tone generator

Great upgrade for the ambulance station or evacuation alarm.


brochure

NZD$1200 + GST

Selcall Controller V1

The Selcall interface has been designed to provide serial commands from the TOCP to a Tait TM8200 mobile radio using the Tait proprietary command protocol, CCDI (Computer Controlled Data Interface).

It connects to PL1 and PL12 on the TOCP Controller board and the 15 way D auxiliary connector on the Tait TM8200 mobile radio.


Inputs - 8
Outputs - 5


brochure

 NZD$ FOC with any new TOCP using Tait TM radio

 

Selcall Controller V2

The Selcall Controller is a Printed Circuit Board Assembly designed to encode and decode sequential signaling to interface to a conventional radio network. The Selcall Controller supports 12 digital inputs, 5 digital outputs, dedicated RS232 serial port and a radio port. The serial port is used for both programming and serial commands when used as a Selcall modem. The radio port connects to any radio with Audio Out, Audio In, PTT and Busy.

Civil Defense version also available.

Programming is by using HyperTerminal or any terminal program.

Inputs - 8
Outputs - 5
brochure

 NZD$750 + GST

or NZD$500 + GST if ordered with TOCP

 

Door Controller

Initially designed for emergency services, these door controllers provide full automation and alarms required. Will work with most commercial sectional, roller or tilt doors.

Used in many NZ Fire and NZ Ambulance stations.

Single & 3phase versions available

Remote controls, safety beams & warning lights all available as well

Programming is by using HyperTerminal or any terminal program.



brochure

from NZD$900 + GST